• g+1

ACDelco Professional Remanufactured Coated Disc Brake Calipers

ACDelco GM Original Equipment Professional Remanufactured Friction Ready Disc Brake Calipers Available Now

ACDelco Professional Remanufactured Coated Disc Brake Calipers use both aluminum and iron castings, making them the ideal premium aftermarket replacement for many vehicles on the road today. Their robotic-applied, baked-on zinc plated coating provides superior rust prevention against harsh environmental elements such as rain, snow, and corrosive road sprays. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to help ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Remanufactured Coated Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand, and all necessary hardware is included for easy installation.


  • Pressure tested to help ensure safe and confident braking
  • Pre-lubrication of critical areas prevents binding
  • Meets 72-hour salt spray corrosion resistance per ASTM B117 testing standards
  • Developed without attached brake pads for customization
  • Robotic-applied, baked-on zinc plated coating helps prevent pulsation and rust


Service & Maintenance:

The following inspections and maintenance procedures can help prevent potential brake problems:

  • Check brake fluid level at every oil change. Replace fluid according to owner’s manual recommendations.
  • Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • Check the thickness of your brake pads.

The following should be conducted by a qualified technician:

  • Inspection of the brake hoses for brittleness or cracking.
  • Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • Inspection of wheel bearings and grease seals.
  • Parking brake adjustments (as needed).


Signs of Wear & Troubleshooting:

Signs that your disc brake calipers may need to be replaced are:

  • Brake warning light is on.
  • Difficulty stopping the vehicle.
  • A low or sinking brake pedal.
  • Vehicle pulls to the left or right when brakes are applied.
  • Brake pedal pulsation (not to be confused with normal ABS operation).



Do I have to replace all my brake parts when replacing my disc brake calipers?

  • No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.

Does ACDelco offer other grades of disc brake calipers?

  • Yes, ACDelco also offers GM OE disc brake calipers.

Do I have to replace my disc brake calipers after a certain amount of time?

  • No, but it is a good idea to inspect them at every tire rotation.


Search Parts Cataloge
Locate Service Center
Locate Parts Store