- Fuel line, fuel fill and multi-port injection hoses resist all blends of common fuels for long-life performance
- Vacuum system and windshield washer fluid hoses have exceptional resistance to kinks and stand up to heat and oil
- Engine oil and transmission oil cooler hoses are specially made for high-temperature use
- Air hoses for a variety of service station and garage uses
Find out more about ACDelco Premium Hoses and how they fit into the Cooling System with the product facts below.
FUNCTION:
To route the heating and air conditioning system's liquid and gas
SIGNS OF WEAR:
Evidence of hose leaking, cracking or hardening, brittleness or lack of heat/cooling within the cabin
DID YOU KNOW:
The best way to check a coolant hose for degradation is to squeeze the hose near the clamps or connectors using the following procedures.
WHAT IT DOES:
The cooling system removes heat from the engine to keep it running at the proper temperature. In the cooling system, belts drive the water pump, circulating coolant throughout the system.
SERVICE AND MAINTENANCE:
FUNCTION:
To route the heating and air conditioning system's liquid and gas
SIGNS OF WEAR:
Evidence of hose leaking, cracking or hardening, brittleness or lack of heat/cooling within the cabin
DID YOU KNOW:
The best way to check a coolant hose for degradation is to squeeze the hose near the clamps or connectors using the following procedures.
- Always make sure the engine is cool before inspecting the cooling system.
- Use your fingers and thumb (not the whole hand) to check for hose weakness.
- Squeeze near the clamps or connectors, as most hose failures occur in this area.
- Check for any noticeable difference in feel between the middle and ends of the hose.
- If the ends feel soft or mushy, replacement is recommended.
WHAT IT DOES:
The cooling system removes heat from the engine to keep it running at the proper temperature. In the cooling system, belts drive the water pump, circulating coolant throughout the system.
SERVICE AND MAINTENANCE:
- Inspect engine belts for cracks or missing sections; check belt tension
- Examine hoses every 12 months. Look for leaks, cracks or rot. Replace when showing signs of wear.
- Tighten any loose clamps. Replace clamps when replacing hoses
- Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
- Periodically, remove bugs, leaves and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
Connect with ACDelco on: