Find out more about ACDelco OES Rotors and how they fit into the Braking
System with the product facts below.
FUNCTION:
To slow or stop the vehicle when the brake pads press against its surface (disc brakes)
SIGNS OF WEAR:
Brake pedal pulsation (not to be confused with normal ABS operation), squealing or grinding noise, low brake pedal height, vehicle pulls to the left or right when brakes are applied
DID YOU KNOW:
When you step on your brake pedal, you command a stopping force 10 times as powerful as the force that puts the car in motion. The braking system can exert as much as 1,000 pounds (450 kg) of hydraulic pressure on each of the four brakes.
WHAT IT DOES:
The brake system applies frictional force to the wheels to slow or stop the vehicle.
SERVICE AND MAINTENANCE:
The following inspections and maintenance procedures can help prevent potential brake problems.
FUNCTION:
To slow or stop the vehicle when the brake pads press against its surface (disc brakes)
SIGNS OF WEAR:
Brake pedal pulsation (not to be confused with normal ABS operation), squealing or grinding noise, low brake pedal height, vehicle pulls to the left or right when brakes are applied
DID YOU KNOW:
When you step on your brake pedal, you command a stopping force 10 times as powerful as the force that puts the car in motion. The braking system can exert as much as 1,000 pounds (450 kg) of hydraulic pressure on each of the four brakes.
WHAT IT DOES:
The brake system applies frictional force to the wheels to slow or stop the vehicle.
SERVICE AND MAINTENANCE:
The following inspections and maintenance procedures can help prevent potential brake problems.
- Check brake fluid level at every oil change. Replace fluid according to owner’s manual recommendations.
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary.)
- Inspection of the brake hoses for brittleness or cracking
- Inspection of brake lining and pads for wear or contamination by brake fluid or grease
- Inspection of wheel bearings and grease seals
- Parking brake adjustments (as needed)
Connect with ACDelco on: