• ACDelco Specialty AGM Powersports, Snowmobile, ATV, And Motorcycle Battery Primary Image
  • ACDelco Specialty AGM Powersports, Snowmobile, ATV, And Motorcycle Battery Alternate Image 1
  • ACDelco Specialty AGM Powersports, Snowmobile, ATV, And Motorcycle Battery Alternate Image 2
  • ACDelco Specialty AGM Powersports, Snowmobile, ATV, And Motorcycle Battery 360 Image


  • This battery is shipped dry with separate acid pack and requires an initial charge before instillation which gives the product a very long shelf life.
  • Convenient acid bottle for the correct amount of acid for the battery, no left over acid to be disposed.
  • Absorbed Glass Mat design makes the battery spill-proof and eliminates water loss.
  • Once vent caps are installed this is a sealed maintenance free battery.
  • Maintenance Free – No liquid required once the battery is sealed.
  • “Through-The-Partition” connection creates greater cranking power and vibration resistance.
  • Completely sealed cover, helps to protect against terminal corrosion and seepage.
  • Polypropylene/Synthetic Resin cover and container resists damage from gas, oil, and other negative impacts.
  • Calcium/Calcium Construction gives maintenance-free performance.


ACDelco Professional Heavy Duty AGM Battery
ACDelco Specialty Conventional Powersports, Snowmobile, ATV, And Motorcycle Battery
ACDelco Flooded Utility And Golf Cart Battery
ACDelco RV And Off-Road Batteries

ACDelco Absorbed Glass Mat (AGM) PowerSports Snowmobile, ATV, and Motorcycle Batteries are designed to be spill proof and leak-proof when correctly filled and sealed. These batteries are shipped to you dry and unfilled in order to ensure maximum freshness. Once acid has been properly added to the battery, the fiberglass mat completely absorbs the acid making it virtually spill and leak-proof. They are 100% maintenance free, no liquid required once the battery is sealed, and engineered for vibration resistance for prolonged life. ACDelco AGM PowerSports Batteries are designed to meet Original Equipment specifications.


12 Month Free Replacement / Limited Warranty on parts sold on or after 10/01/14*

*To the original retail purchaser. Parts only; installation not included. See your local retailer or independent service center that offers ACDelco parts for details.


New batteries should be given a full charge before use:

• For best battery life, batteries should not be discharged below 80% of their rated capacity. Proper battery sizing will avoid excessive battery discharge.

• Inactivity can be extremely harmful to all lead acid batteries. ACDelco recommends the following for seasonal use:

• Completely charge the battery before storing.
• Remove all electrical connections, including series/parallel connectors.
• Store in a cool (not below freezing) place.
• When not in use, boost every two months.

• Check the battery as part of regular vehicle maintenance.

• Keep battery terminals clean and free of corrosion.

• To remove corrosion from terminals use a terminal brush.

• Check the alternator and make sure that it is not charging too high or low. If the alternator is not charging properly it will cause the battery to not charge correctly and cause deterioration.

• Avoid exposing the battery to extreme heat whenever possible.

• Turn off other electrical accessories (stereos, internal lights, etc.) as soon as they are no longer required to save electrical energy.

• A battery not in use tends to run down and create sulfate deposits. After your battery has been filled and charged, it is essential that you keep it adequately charged either by running the vehicle, or by using an independent battery charger. If charging is required use a 0.5~1.5 amp slow charger overnight to return the battery to full charge.

• Do not leave battery on a continuous charge cycle.

• Check fitment of the battery into your vehicle prior to the addition of Acid.

• Adding acid makes this battery Non-Returnable.

• Once you have determined that this is the correct battery. Add the acid.

• This battery MUST be charged before instillation with a 12 volts 0.5~1.5 amp Motorcycle battery charger.

• Not charging the battery prior to installation can/will lead to premature failure.




ACDelco Wire And Cable
ACDelco Starters
ACDelco Alternators
ACDelco Spark Plugs

Search Parts Cataloge
Locate Service Center
Locate Parts Store