GOLD (PROFESSIONAL) BRAKE DRUMS
FEATURES & BENEFITS
- Inspected for balance; helping with smooth brake operation and noise levels
- Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
- Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while also helping to minimize noise and vibration
- Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
ACDelco Gold (Professional) Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide great braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them the ideal premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Gold (Professional) Brake Drums are ready to be installed right out of the box. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
24 Month/Unlimited Mile Limited Warranty*: Our most common Parts Warranty offers coverage on the majority of our GM Genuine Parts and ACDelco service replacement parts. Effective on parts purchased April 1, 2018 and later to the original retail purchaser. Contact seller for limited warranty part details, qualifications, and possible labor coverage.
Learn more about our warranties: https://www.acdelco.com/parts/warranties
Do I have to replace my brake shoes after a certain amount of time?
No, you may not have to, but while it is a good idea to inspect your brake shoes at each tire rotation
Do I need to check my brake fluid when replacing other brake parts?
Yes, it is a good idea to inspect your brake fluid often.
Do I have to replace all my brake parts when replacing my brake shoes?
No, you may not have to, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
The following inspections and maintenance procedures can help prevent potential brake problems:
- Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
The following should be conducted by a qualified technician:
- Inspection of the brake hoses for brittleness or cracking.
- Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- Inspection of wheel bearings and grease seals.
- Parking brake adjustments (as needed).